C3 Chevrolet Corvette Weatherstrip, Body Seal & Molding

C3 Corvette Weatherstrip Kits

Engineers at Chevrolet roll out a new Corvette generation every few years. Some releases follow a similar design as models from the previous generation, but this pattern was not the case for C3 production runs. GM changed the look of 1968-1982 Corvettes with contoured edges, steep rooflines, pointed front bumpers and side-profile vents for vehicles with aggressive and aerodynamic constructions.

The new, shark-inspired design surprised consumers, and drivers enjoyed knowing that much of the C3’s exterior body contained fiberglass for lightweight styling. Stock configurations of the late 1960s offered over 300 horsepower. These qualities make these vehicles desirable 50 years later. 

If you’re a sports car collector and have a C3 Corvette in your garage, fixing your ride is essential for racing events, Chevrolet outings and parades. Top Flight Automotive carries C3 Corvette weatherstripping products to defend against inclement weather. Keep your vintage Corvette looking its best with exterior pieces that install in minutes.

The Importance of C3 Corvette Weatherstripping

All Corvette vehicles leave the production factory with the original equipment manufacturer (OEM) weatherstripping near windows, convertible roofs and doors. These installations tie the appearance of your vehicle together and block off openings that collect water. Rubber sections that sit along the outside of your vehicle protect cabin walls, interior seats and dash surfaces from taking damage.

After ripping up the road and track for decades, inspect the condition of your C3’s weatherstripping. Doing so can save you from a catastrophe in the future and help you avoid costly repairs. Weatherstripping is easy to install, and pieces serve cosmetic and practical functions.

When Should I Replace My C3 Weatherstripping?

Many factors put weatherstripping to the test year-round. Exposed to rain, snow and high-speed winds, factory installations experience wear and tear. Drivers often forget to replace OEM weatherstripping until they see a third-generation Corvette in mint condition. However, several warning signs can indicate that sections are wearing away:

  • Weatherstripping is fading.
  • OEM areas show cracks or punctures.
  • You hear excess road noise.
  • Pieces of weatherstripping are hard.
  • Rainfall makes its way inside the cabin.
  • Sections of weatherstripping are missing.

C3 Corvette Weatherstripping Options at Top Flight Automotive

Top Flight Automotive caters to all Corvette generations, as we have the most comprehensive, in-stock inventory of replacement parts, including C3 weatherstripping products. We source most of our offerings through the biggest names in the restoration industry, such as Corvette America and Auto Accessories of America, for prolonged results. Purchase listings in some of our best-selling categories:

  • C3 back glass weatherstripping
  • C3 convertible top seals
  • C3 Corvette door seals
  • C3 Corvette door window seals
  • C3 Corvette hood seals
  • C3 complete weatherstrip kits
  • C3 weatherstrip adhesives

1968-1982 C3 Corvette Back Glass Weatherstripping

If you own a 1968-1982 Corvette coupe, Top Flight Automotive brings you C3 window molding products that allow water to roll off the back of your vehicle. C3 Corvette rear windows are directly behind the driver and passenger seats for optimum visibility. Our offerings from Corvette America stop inclement weather from interfering with seat upholsteries and cabin carpets, so you always take first place in award shows.

1968-1975 C3 Corvette Convertible Top Seals

Top Flight Automotive introduces customers to weatherstripping sections that install around your 1968-1975 Corvette soft top. If a sudden storm catches you off guard, know that front-facing, side rail and rear weatherstripping sections are there to protect your beloved C3. Our professionals recommend viewing installation diagrams alongside each soft top listing to see how each piece mounts to your vehicle.

1968-1982 C3 Corvette Door Seals

Reduce whistling and cabin vibrations using C3 Corvette door weatherstripping by Corvette America. Our online store is home to right- and left-side sections for coupe and convertible Corvettes. Select listings make it possible to replace all weatherstripping near handles, flooring and windows to block splashes from every angle.

1968-1982 C3 Corvette Hood Weatherstripping

Your C3’s hood covers an essential part of your performance vehicle, the engine. Whether your car features a small- or big-block engine build, it’s vital to stop water from entering the engine compartment. You can reduce your chances of engine damage by opting for our affordable C3 Corvette hood weatherstrip sections that mount just below the windshield and wiper assembly.

Corvette America Solutions prevent windshield wiper fluid, dust, moisture and contaminants from entering the engine compartment near the hood latch. From downpours to rinsing off your vehicle, Top Flight Automotive’s C3 Corvette hood weatherstripping sets you up for a dry cabin and long-term restoration success.

C3 Corvette Weatherstrip Kits

Top Flight Automotive carries complete C3 Corvette weatherstrip kits to replace your worn OEM installations. Find compatible weatherstrip bundles for all model years in the third-generation lineup. Placing an order for our C3 Corvette weatherstrip kits is proactive if multiple sections of your vehicle show signs of wear and you plan to upgrade several weatherstripping sections in the same project.

You can find eight-, nine- and ten-piece Corvette weatherstrip bundles in our inventory. The C3 generation changed between 1968 and 1982, so review product details to ensure a correct fit across your coupe or convertible. Select weatherstrip kits arrive with rubber materials for the exterior parts below:

  • Doors
  • Roofs and convertible tops
  • Back windows
  • Hoods

C3 Corvette Weatherstrip Adhesive Products

You need special auto adhesives for clean results when you install C3 weatherstripping. Browse our online store for fast-drying products that apply as a liquid and create durable bonds between rubber strips and exterior surfaces. Note that weatherstrip adhesives from the 3M Company are not eligible for shipping by air. We can only deliver five-ounce adhesive solutions via ground shipping.

Order C3 Corvette Weatherstripping From Us Today

High-quality Corvette restoration parts are challenging to find, and Top Flight Automotive solves this problem. With price matching guarantees, remarkable customer service and the most experienced sales team in the industry, we are your source for C3 components and accessories at budget-friendly prices. Shop our C3 Corvette weatherstripping products 24/7/365, and call us if you need assistance during our normal business hours.

Our team belongs to the Extra Mile Brands family of companies, manufacturing innovative technology in the Corvette world for over four decades. Reach out online for more information about C3 window moldings and weatherstrip kits.

Can't find what you're looking for? Let us know and we can help! Contact Us

Welcome to Top Flight Automotive! Home of: