Features/Benefits

• The Two Primary Functions Of Sway Bars Are To Control Body Roll And To Determine The Understeer Or Oversteer Behavior Of A Vehicle. Stock Sway Bars Have Low Torsional Spring Rates Because They Are Manufactured From Small Diameter Bar Stock Or Tubing. BMR Suspension's MA9156 Front Sway Bar Was Designed By Factoring In The Vehicle Weight, Application, Motion Ratio, Coil Spring Rate, And Adjustability Requirements. Manufactured From Heavy-Wall 35Mm Dom Tubing, The MA9156 Is Cold Formed To Better Resist Torsional Fatigue And Retain Its "Memory" Far Longer Than The Hot-Formed Bars Used By Many Competitors. The Sway Bar Is Cnc-Formed For Exact Manufacturing Tolerances And Repeatable High Quality. Thrust Washers Are Welded To The Bar To Locate The Sway Bar Bushing Mounts. This Is Critical As It Properly Locates The Sway Bar And Prevents Lateral Movement During Hard Cornering Maneuvers. The Sway Bar Mounts To The Car Using Polyurethane Bushings. These Bushings Are Molded From 88-Durometer, Low-Deflection, Polyurethane, And Are Internally Fluted To Keeps Grease In The Bushing. The Steel Sway Bar Mounting Brackets Are Reinforced To Minimize Deflection. The Sway Bar Is 3-Way Adjustable To Tune The Amount Of Torsional Spring Rate And To Determine The Handling Characteristics (Understeer/Oversteer) Of The Vehicle.
• BMR Suspension Designed The MA9156 Sway Bar For Street Performance, Autocross, And Road Race Applications. The Large Adjustable Sway Bar's Three Positions Give You The Versatility To Drive To And From The Road Course Or Autocross And Still Out Handle The Competition With The Same Sway Bar. The Rate Increases And Adjustability Allow You To Fine-Tune The Handling Characteristics Of Your Mustang So You Can Drive Harder Through Corners With Minimal Body Roll. The Hollow Design Allows For Loads Of Strength In The Lightest Package Possible.